Hydraulic Cable Cutter
Hydraulic Cable CutterHydraulic Cable Cutter
Hydraulic Cable CutterThe cutting tools feature an advancing speed setting automatically switching from a fast advancing speed of cable cutting blades to a slower cutting speed – tools are provided with a maximum pressure valve (MPC1 manometer is available upon request to check the proper setting of the valve).
Cutting Cables Carefully
- Always read the instruction manual before using the tool
- Keep hands clear of cutting blades at all times
- Do not cut steel – for steel cutting applications contact us
- Always wear safety glasses and gloves when operating this tool
- Before starting cutting cables ensure that the latch is fully secured – partial closure may damage the cutting tool head
- Clean the tool daily after use with a clean cloth to remove any residue including dust, sand or dirt
- Do not attempt to turn the tool head if the hydraulic circuit is pressurised
OTDR
OTDROTDR
OTDR- Quick startup
- FTTX in-service testing (Up to1:64 splitter)
- Built-in PON power meter for Triple-play testing (Only for SUN-OT5000-PON)
- High configuration series include optical light source, optical power meter, visual fault locator (VFL) and Optical Connector Inspector (MCI) modules
- USB data interface (PC software for batch data processing and report output)
- Dustproof and shockproof (2-meter drop test)
- Light weight, small size, rugged design and simple operation
- Visual link image software (Optional)
Wire Brush Mandrel
Wire Brush MandrelWire Brush Mandrel
Wire Brush MandrelFlat steel bristles with a pulling eye on one end and a loop on the other end. Easily removes sand, grit and other light obstructions from the duct. 800 lbs. (3,558 N) load capacity.
Visual Fault Locator Adapter
Visual Fault Locator AdapterVisual Fault Locator Adapter
Visual Fault Locator Adapter- FC Male to LC Female Hybrid Optical Fiber Connecor
- Repeatability (dB)≤ 0.20
- Interchangeability (dB)≤ 0.20
- Sleeve material :Zirconia ceramics
- Operating Temperature (degree):-25 ~ + 75
Stainless steel drop wire clamp
Stainless steel drop wire clampStainless steel drop wire clamp
Stainless steel drop wire clampStainless steel anchor clamp, drop wire clamp, FTTH clamp
Pole Top Bracket
Pole Top BracketPole Top Bracket
Pole Top BracketPole top bracket is made to permit mounting on wood poles by two 16mm diameter bolts vertically spaced 203mm center to center. One of the bracket mounting holes is slotted to permit slight variations in mounting bolt spacing. The insulator mounting surface is at a height approximately 125mm above the top bracket mounting hole.
Manhole Safety Net
Manhole Safety NetManhole Safety Net
Manhole Safety NetWifi Handheld Optical Fiber End Face Inspection Microscope
Wifi Handheld Optical Fiber End Face Inspection MicroscopeWifi Handheld Optical Fiber End Face Inspection Microscope
Wifi Handheld Optical Fiber End Face Inspection MicroscopeRack mount type PLC splitter
Rack mount type PLC splitterRack mount type PLC splitter
Rack mount type PLC splitter1*16 PLC Splitter PLC-B-1*8-SC/UPC-2.0-1M
PLC Splitter Cassette
PLC Splitter CassettePLC Splitter Cassette
PLC Splitter Cassette1*8 PLC Splitter PLC-B-1*8-SC/UPC-2.0-1M Best price,High quality,Good service
Steel Tube Mini PLC Splitter
Steel Tube Mini PLC SplitterSteel Tube Mini PLC Splitter
Steel Tube Mini PLC SplitterMini PLC Splitter 1*4, 1*8, 1*16, 1*32
Patch Cord
Patch CordPatch Cord
Patch Cordpigtail, patch cord, single mode High quality,Best price,Good service
Distribution Grip Dead-end Neoprene Coated
Distribution Grip Dead-end Neoprene CoatedDistribution Grip Dead-end Neoprene Coated
Distribution Grip Dead-end Neoprene CoatedDistribution Grip Dead-end Neoprene Coated
Distribution Grip Dead-end
Distribution Grip Dead-endDistribution Grip Dead-end
Distribution Grip Dead-endDistribution-Grip dead-ends are recommended for termination of bare or jacketed conductors used in distribution constructions.
Preformed Guy Grips Clamp
Preformed Guy Grips ClampPreformed Guy Grips Clamp
Preformed Guy Grips ClampPreformed Guy Grips Clamp
Tension sets
Tension setsTension sets
Tension sets1. Short span length 200m
2. Terminal pole tower, tension pole/tower,
3. Pole/tower with corner angles greater than 15°and RTS no more than 20kN
4. Suitable for city ADSS cable installation.
Hot Deals Products Off The Days
Aliquam eget consectetuer habitasse interdum.
Series Cable Locator
Series Cable LocatorSeries Cable Locator
Series Cable LocatorSE series cable locator by the domestic professional R & D team to build, the integration of ultra-narrowband filter, Bluetooth wireless communications, GPS positioning, professional data analysis software automatically map, automatic detection of the most advanced technology, with superior anti-jamming capability, Accurate positioning and depth of detection and other excellent detection performance for a variety of underground metal pipeline detection and inspection line, pipeline management and maintenance, municipal planning and construction, power supply and other departments of pipeline testing, is one of the necessary equipment for cable maintenance units.
Rack Mount Patch Panel
Rack Mount Patch PanelRack Mount Patch Panel
Rack Mount Patch PanelOne is the slide-out variety and the other incorporates a removable lid. As for the latter one, the tray can be pulled out and lowered to 10 degree working angle or even further 45 degree working angle to provide ease of access for maintenance or installation work.
Fibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission ModuleFibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission Module- Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
- The UTP port supports the connection of MDI/MDI-X auto crossover.
- Singlemode Fiber: the max distance up to 60km
- Supporting the max 1536 byte Ethernet packet
- Supporting flow control
- Adopting internal power supply
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDMFiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDMApplications:
- Line Monitoring
- WDM Network
- Telecommunication
- Cellular Application
- Fiber Optical amplifier
- Access Network Performance
Pole Top Pin
Pole Top PinPole Top Pin
Pole Top PinThe pole top pin is made from hot new rolled steel. The steel will heat to red and punched to the designed shape. The finish of the pole top pin is hot dip galvanized which is reasonably smooth and free of burrs or other sharp projections.
Cable Lasher with Chest
Cable Lasher with ChestCable Lasher with Chest
Cable Lasher with ChestComputer & Laptop
New Arrivals
Rack mount type PLC splitter
Rack mount type PLC splitterRack mount type PLC splitter
Rack mount type PLC splitter1*16 PLC Splitter PLC-B-1*8-SC/UPC-2.0-1M
PLC Splitter Cassette
PLC Splitter CassettePLC Splitter Cassette
PLC Splitter Cassette1*8 PLC Splitter PLC-B-1*8-SC/UPC-2.0-1M Best price,High quality,Good service
Steel Tube Mini PLC Splitter
Steel Tube Mini PLC SplitterSteel Tube Mini PLC Splitter
Steel Tube Mini PLC SplitterMini PLC Splitter 1*4, 1*8, 1*16, 1*32
Patch Cord
Patch CordPatch Cord
Patch Cordpigtail, patch cord, single mode High quality,Best price,Good service
Distribution Grip Dead-end Neoprene Coated
Distribution Grip Dead-end Neoprene CoatedDistribution Grip Dead-end Neoprene Coated
Distribution Grip Dead-end Neoprene CoatedDistribution Grip Dead-end Neoprene Coated
Distribution Grip Dead-end
Distribution Grip Dead-endDistribution Grip Dead-end
Distribution Grip Dead-endDistribution-Grip dead-ends are recommended for termination of bare or jacketed conductors used in distribution constructions.
Preformed Guy Grips Clamp
Preformed Guy Grips ClampPreformed Guy Grips Clamp
Preformed Guy Grips ClampPreformed Guy Grips Clamp
Tension sets
Tension setsTension sets
Tension sets1. Short span length 200m
2. Terminal pole tower, tension pole/tower,
3. Pole/tower with corner angles greater than 15°and RTS no more than 20kN
4. Suitable for city ADSS cable installation.
Polishing Fixture,Polishing Jig
Polishing Fixture,Polishing JigPolishing Fixture,Polishing Jig
Polishing Fixture,Polishing JigOn sale Products
Top rated Products
Pole Top Pin
Pole Top PinPole Top Pin
Pole Top PinThe pole top pin is made from hot new rolled steel. The steel will heat to red and punched to the designed shape. The finish of the pole top pin is hot dip galvanized which is reasonably smooth and free of burrs or other sharp projections.
FTTH Fiber Optic Tool Kit
FTTH Fiber Optic Tool KitFTTH Fiber Optic Tool Kit
FTTH Fiber Optic Tool KitIncludes:
4-in-1 fiber optic power multimeter, 1.25mm/2.5mm cleaning tool, fiber stripper, drop cable stripper, Kevlar scissors, optical Fiber Cleaver, 6P/8P crimper, LED head light and more.
Metal Single Line Top Tie
Metal Single Line Top TieMetal Single Line Top Tie
Metal Single Line Top TieMetal Single line/top ties are intended for securing bare conductors into the top groove of insulators. On vertically-mounted insulators, single line ties/ top ties can normally accommodate line angels of up to 10̊ depending on insulator orientation.
Fiber Cleaver Mini
Fiber Cleaver MiniFiber Cleaver Mini
Fiber Cleaver Mini- Used for Single Fiber Cleaving
- Utilizes an Automatic Anvil Drop for Fewer Required Steps and Better Cleave Consistency
- Prevents Double Scoring of the Fibers
- Has Superior Blade Height and Rotational Adjustment
- Available With Automatic Fiber Scrap Collection
- Can Be Operated With Minimal Steps
Patch Cord
Patch CordPatch Cord
Patch Cordpigtail, patch cord, single mode High quality,Best price,Good service
Glass Fiber Optic Cable
Glass Fiber Optic CableGlass Fiber Optic Cable
Glass Fiber Optic CableLow dispersion and attenuation
Proper design, precise control for fiber excess length and distinct stranding process render the cable excellent mechanical and environmental properties
Double-jacket structure make cable have nice properties of moisture resistance and crush resistance
With small cable diameter, light cable weight, easily to lay
Operating Temperature : -40 ~ +60 ℃
Waterproofing layer providing strong water-resistance performance
Steel tape with PE outer sheathing and metallic strengthening member enhancing anti-crush and tensile property of cable
Up to 24 fiber cores
The loose tube is centrally situated with good excess length and minimizes the influence of lateral crush.
Double wire as strength member provides excellent strain performance.
Cable Roller
Cable RollerCable Roller
Cable RollerOTDR Launch Cable Box
OTDR Launch Cable BoxOTDR Launch Cable Box
OTDR Launch Cable BoxAnchor clamp
Anchor clampAnchor clamp
Anchor clampThese anchor clamps are made of one opened conical fibre glass reinforced body, a pair of plastic wedges and a flexible bail. Different sizes offer a wide range of gripping capacities and mechanical resistances to fit the various ADSS cable designs.
The ADSS series of anchor clamps allow an easy and quick securing of Ø 6 to 20 mm aerial circular fibre optic cables (ADSS) on short spans (up to 150 meters).