Description
Fiberglass Insulated Telescopic Operating Rod Hot Stick Link Stick
Telephone Enquiry: +254-724 065 904
Menu
≡
╳
Related Products
Guy Thimble
Guy Thimble
Guy Thimble
Guy ThimbleGuy thimble is also called cable thimble which is used on pole band to work as an interface fitting to connect the guy grip or guy wire. The guy thimble is widely used on the electric power line or dead-end pole line. The cable thimble usually connects with the preformed tension clamp to support and protect the ADSS/OPGW cable.
Pole Top Make Off
Pole Top Make Off
Pole Top Make Off
Pole Top Make OffPole Band
Pole Band
Pole Band
Pole BandA pole band is designed to suitable for use on poles of pole top diameter 150mm to 280mm. We have supplied a diameter of 155mm, 185mm, 230mm, and so on.
The pole band has a stay tension strength not exceeding 29kn. While the result will be different if a gain grid or some other device is used to transfer the shear load from the pole bolt.
Overhead Line
Overhead Line
Overhead Line
Overhead LineRatchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable CutterHydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable CutterThe cutting tools feature an advancing speed setting automatically switching from a fast advancing speed of cable cutting blades to a slower cutting speed – tools are provided with a maximum pressure valve (MPC1 manometer is available upon request to check the proper setting of the valve).
Cutting Cables Carefully
- Always read the instruction manual before using the tool
- Keep hands clear of cutting blades at all times
- Do not cut steel – for steel cutting applications contact us
- Always wear safety glasses and gloves when operating this tool
- Before starting cutting cables ensure that the latch is fully secured – partial closure may damage the cutting tool head
- Clean the tool daily after use with a clean cloth to remove any residue including dust, sand or dirt
- Do not attempt to turn the tool head if the hydraulic circuit is pressurised
MPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panelFeatures:
- Simple to use, convenient installation
- High density easy-plug cassette solution up to 96-fiber per 1U rack enclosure
- Improve cable manageability
- Pre-installed 12 or 24 fiber MPO adapter at the rear, choices of SC, LC adaptors at the front panel (faceplate)
- Can be pre-installed with factory-terminated & factory-tested MPO/MTP hydra assembly inside cassette module
Ball Clevis
Ball Clevis
Ball Clevis
Ball ClevisAccording to the different shapes, there is another type called Y clevis. It’s because the structure is like letter “Y”. On the one hand of the ball clevis is a ball head. On the other hand, there is a steel pin or hex bolt going through the two holes of the ball clevis. So that, there is space for the U clevis to connect the ball clevis.
Double Bundle Overhead Line
Double Bundle Overhead Line
Double Bundle Overhead Line
Double Bundle Overhead Line1. 2-Bundle Overhead Line Stringing Equipment
2. Main pump and motor: German Rexroth
3. Hydraulic Puller Tensioner
4. Max pull: 2x70kN
5. Diesel: Cummins 129kw(173hp)
6. Speed Reducer: German Rexroth
7. Bull-wheel diameter: 1700mm
8. Max rope diameter: 24mm
9. Max reel size: 1700mm
Rack Mount Patch Panel
Rack Mount Patch Panel
Rack Mount Patch Panel
Rack Mount Patch PanelOne is the slide-out variety and the other incorporates a removable lid. As for the latter one, the tray can be pulled out and lowered to 10 degree working angle or even further 45 degree working angle to provide ease of access for maintenance or installation work.
Aniscom Technologies Limited was established in 2015. The company is one of the leading suppliers of telecommunication network equipment.
- Address: Repen Complex, Block A, Suite A203.
- Mobile: +254-724 065 904
- Email: info@aniscom.co.ke