Telephone Enquiry: +254-724 065 904
Menu
≡
╳
Related Products
Hydraulic Transmission Line
Hydraulic Transmission Line
Hydraulic Transmission Line
Hydraulic Transmission Line- Overhead Tansmission Line Stringing Equipment
- Hydraulic Puller
- Max pull: 280kN 28T
- Max rope diameter: 38mm
- Max reel size: 1600mm
- Diesel: Cummins 298kw (400hp)
- Main pump and motor: German (Rexroth)
- Tail bracket hoisting motor: American (Eton)
Pole Band
Pole Band
Pole Band
Pole BandA pole band is designed to suitable for use on poles of pole top diameter 150mm to 280mm. We have supplied a diameter of 155mm, 185mm, 230mm, and so on.
The pole band has a stay tension strength not exceeding 29kn. While the result will be different if a gain grid or some other device is used to transfer the shear load from the pole bolt.
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable CutterThe cutting tools feature an advancing speed setting automatically switching from a fast advancing speed of cable cutting blades to a slower cutting speed – tools are provided with a maximum pressure valve (MPC1 manometer is available upon request to check the proper setting of the valve).
Cutting Cables Carefully
- Always read the instruction manual before using the tool
- Keep hands clear of cutting blades at all times
- Do not cut steel – for steel cutting applications contact us
- Always wear safety glasses and gloves when operating this tool
- Before starting cutting cables ensure that the latch is fully secured – partial closure may damage the cutting tool head
- Clean the tool daily after use with a clean cloth to remove any residue including dust, sand or dirt
- Do not attempt to turn the tool head if the hydraulic circuit is pressurised
Wall Mount Patch Panel
Wall Mount Patch Panel
Wall Mount Patch Panel
Wall Mount Patch PanelWire Grip Clamp
Wire Grip Clamp
Wire Grip Clamp
Wire Grip ClampFibre Patch Panel Termination
Fibre Patch Panel Termination
Fibre Patch Panel Termination
Fibre Patch Panel TerminationPole Top Pin
Pole Top Pin
Pole Top Pin
Pole Top PinThe pole top pin is made from hot new rolled steel. The steel will heat to red and punched to the designed shape. The finish of the pole top pin is hot dip galvanized which is reasonably smooth and free of burrs or other sharp projections.
Guy Clamp
Guy Clamp
Guy Clamp
Guy ClampAccording to the number of bolts, there are 3 types:1 bolt guy clamp, 2 bolt guy clamp, and 3 bolt guy clamp. 3 bolt clamp is most used due to the excellent performance.
In another installation way, the guy clamp is replaced by the wire rope clip or guy grip. Some types of guy clamps have curved ends, protecting the wire from damage.
Ball Clevis
Ball Clevis
Ball Clevis
Ball ClevisAccording to the different shapes, there is another type called Y clevis. It’s because the structure is like letter “Y”. On the one hand of the ball clevis is a ball head. On the other hand, there is a steel pin or hex bolt going through the two holes of the ball clevis. So that, there is space for the U clevis to connect the ball clevis.
Wire Rope Grip
Wire Rope Grip
Wire Rope Grip
Wire Rope GripUpsell Products
Ratchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable Cutter
Ratchet Cable Cutter
KSh75
Fall Protection
Fall Protection
KSh75
Fall Protection
Fall ProtectionPole Climbing
Pole Climbing
Pole Climbing
Pole ClimbingPole Top Bracket
Pole Top Bracket
Pole Top Bracket
Pole Top BracketPole top bracket is made to permit mounting on wood poles by two 16mm diameter bolts vertically spaced 203mm center to center. One of the bracket mounting holes is slotted to permit slight variations in mounting bolt spacing. The insulator mounting surface is at a height approximately 125mm above the top bracket mounting hole.
Cable Lasher with Chest
Cable Lasher with Chest
Cable Lasher with Chest
Cable Lasher with ChestHand Ratchet Cable Puller
Hand Ratchet Cable Puller
Hand Ratchet Cable Puller
Hand Ratchet Cable Puller
Aniscom Technologies Limited was established in 2015. The company is one of the leading suppliers of telecommunication network equipment.
- Address: Repen Complex, Block A, Suite A203.
- Mobile: +254-724 065 904
- Email: info@aniscom.co.ke