Telephone Enquiry: +254-724 065 904
Menu
≡
╳
Related Products
Hydraulic Transmission Line
Hydraulic Transmission Line
Hydraulic Transmission Line
Hydraulic Transmission Line- Overhead Tansmission Line Stringing Equipment
- Hydraulic Puller
- Max pull: 280kN 28T
- Max rope diameter: 38mm
- Max reel size: 1600mm
- Diesel: Cummins 298kw (400hp)
- Main pump and motor: German (Rexroth)
- Tail bracket hoisting motor: American (Eton)
Overhead Line
Overhead Line
Overhead Line
Overhead LineDouble Bundle Overhead Line
Double Bundle Overhead Line
Double Bundle Overhead Line
Double Bundle Overhead Line1. 2-Bundle Overhead Line Stringing Equipment
2. Main pump and motor: German Rexroth
3. Hydraulic Puller Tensioner
4. Max pull: 2x70kN
5. Diesel: Cummins 129kw(173hp)
6. Speed Reducer: German Rexroth
7. Bull-wheel diameter: 1700mm
8. Max rope diameter: 24mm
9. Max reel size: 1700mm
Guy Thimble
Guy Thimble
Guy Thimble
Guy ThimbleGuy thimble is also called cable thimble which is used on pole band to work as an interface fitting to connect the guy grip or guy wire. The guy thimble is widely used on the electric power line or dead-end pole line. The cable thimble usually connects with the preformed tension clamp to support and protect the ADSS/OPGW cable.
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable CutterThe cutting tools feature an advancing speed setting automatically switching from a fast advancing speed of cable cutting blades to a slower cutting speed – tools are provided with a maximum pressure valve (MPC1 manometer is available upon request to check the proper setting of the valve).
Cutting Cables Carefully
- Always read the instruction manual before using the tool
- Keep hands clear of cutting blades at all times
- Do not cut steel – for steel cutting applications contact us
- Always wear safety glasses and gloves when operating this tool
- Before starting cutting cables ensure that the latch is fully secured – partial closure may damage the cutting tool head
- Clean the tool daily after use with a clean cloth to remove any residue including dust, sand or dirt
- Do not attempt to turn the tool head if the hydraulic circuit is pressurised
Wire Grip Clamp
Wire Grip Clamp
Wire Grip Clamp
Wire Grip ClampFibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission Module- Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
- The UTP port supports the connection of MDI/MDI-X auto crossover.
- Singlemode Fiber: the max distance up to 60km
- Supporting the max 1536 byte Ethernet packet
- Supporting flow control
- Adopting internal power supply
Anchor Rod
Anchor Rod
Anchor Rod
Anchor RodGuy wire anchor rod feature:
1. Breaking Load test: 62kn for 1 min
2. Hot-dip galvanized strictly according to ASTM-123
3. Uniform and reasonable packing
4. Size Accuracy 0.1mm.
5. Direct From Factory, Save 30%–50% Cost
The guy wire anchor rod with square nut is manufactured in hot-dip galvanized steel. The raw material steel is selected according to AISI-SAE 1018 or 1020. The carbon is not lower than 0.13% according to ASTM A36M. Zinc coating of 80 um, according to ASTM A-153. The head of the guy wire anchor rod will be forged in one single piece with a single eye, twin-eye, or trip eye as attached drawings.The other side rod is with 8cm to 10cm thread length according to UNC. The UNC required 10thread per inch.
The heavy-duty square nut which assembled on the guy wire anchor rod is of galvanized steel with a minimum coating of 53 um, according to class C of ASTM A153. The square nut thread is made before galvanization.
Guy Clamp
Guy Clamp
Guy Clamp
Guy ClampAccording to the number of bolts, there are 3 types:1 bolt guy clamp, 2 bolt guy clamp, and 3 bolt guy clamp. 3 bolt clamp is most used due to the excellent performance.
In another installation way, the guy clamp is replaced by the wire rope clip or guy grip. Some types of guy clamps have curved ends, protecting the wire from damage.
Pole Climbing
Pole Climbing
Pole Climbing
Pole Climbing
Aniscom Technologies Limited was established in 2015. The company is one of the leading suppliers of telecommunication network equipment.
- Address: Repen Complex, Block A, Suite A203.
- Mobile: +254-724 065 904
- Email: info@aniscom.co.ke
Reviews
There are no reviews yet.