Telephone Enquiry: +254-724 065 904
Menu
≡
╳
Related Products
Cable Lasher with Chest
Cable Lasher with Chest
Cable Lasher with Chest
Cable Lasher with ChestMessenger Wire
Messenger Wire
Messenger Wire
Messenger WirePole Top Bracket
Pole Top Bracket
Pole Top Bracket
Pole Top BracketPole top bracket is made to permit mounting on wood poles by two 16mm diameter bolts vertically spaced 203mm center to center. One of the bracket mounting holes is slotted to permit slight variations in mounting bolt spacing. The insulator mounting surface is at a height approximately 125mm above the top bracket mounting hole.
Fibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission Module
Fibre Optic Media Converter 100 Base Fast Transmission Module- Auto negotiation function allows UTP ports to auto select 10/100/1000M and Full Duplex or Half Duplex.
- The UTP port supports the connection of MDI/MDI-X auto crossover.
- Singlemode Fiber: the max distance up to 60km
- Supporting the max 1536 byte Ethernet packet
- Supporting flow control
- Adopting internal power supply
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDM
Fiber Optic Mux/Demux CWDMApplications:
- Line Monitoring
- WDM Network
- Telecommunication
- Cellular Application
- Fiber Optical amplifier
- Access Network Performance
Double Bundle Overhead Line
Double Bundle Overhead Line
Double Bundle Overhead Line
Double Bundle Overhead Line1. 2-Bundle Overhead Line Stringing Equipment
2. Main pump and motor: German Rexroth
3. Hydraulic Puller Tensioner
4. Max pull: 2x70kN
5. Diesel: Cummins 129kw(173hp)
6. Speed Reducer: German Rexroth
7. Bull-wheel diameter: 1700mm
8. Max rope diameter: 24mm
9. Max reel size: 1700mm
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable Cutter
Hydraulic Cable CutterThe cutting tools feature an advancing speed setting automatically switching from a fast advancing speed of cable cutting blades to a slower cutting speed – tools are provided with a maximum pressure valve (MPC1 manometer is available upon request to check the proper setting of the valve).
Cutting Cables Carefully
- Always read the instruction manual before using the tool
- Keep hands clear of cutting blades at all times
- Do not cut steel – for steel cutting applications contact us
- Always wear safety glasses and gloves when operating this tool
- Before starting cutting cables ensure that the latch is fully secured – partial closure may damage the cutting tool head
- Clean the tool daily after use with a clean cloth to remove any residue including dust, sand or dirt
- Do not attempt to turn the tool head if the hydraulic circuit is pressurised
Overhead Line
Overhead Line
Overhead Line
Overhead LineMPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panel
MPO/MTP patch panelFeatures:
- Simple to use, convenient installation
- High density easy-plug cassette solution up to 96-fiber per 1U rack enclosure
- Improve cable manageability
- Pre-installed 12 or 24 fiber MPO adapter at the rear, choices of SC, LC adaptors at the front panel (faceplate)
- Can be pre-installed with factory-terminated & factory-tested MPO/MTP hydra assembly inside cassette module
Wire Rope Falling Protector
Wire Rope Falling Protector
Wire Rope Falling Protector
Wire Rope Falling Protector1) Fall arrester is made of sealed aluminum housing, automatically controlled by the changed speed. It is an innovative engineering solution to arrest falls by two-disc anti-ratchet braking system.
2) A fall arrest system is a personal fall protection system that arrests a free fall and which limits the impact force on the body of the user or goods during fall arrest.
3) Store in a cool dry place, far away from chemical, water, direct sun light and sources of heat and vibration. Ensure cable section is completely retracted before storage. This is especially important when retractors are left in place outside as components of a permanent fall protection system.
Aniscom Technologies Limited was established in 2015. The company is one of the leading suppliers of telecommunication network equipment.
- Address: Repen Complex, Block A, Suite A203.
- Mobile: +254-724 065 904
- Email: info@aniscom.co.ke
Reviews
There are no reviews yet.